Remote Control Codes

Posted in Services

Instead of using two remote controls, one for Sky and one for your television, you can usually set your Sky remote controller to operate the volume on most makes of television...

Instead of using two remote controls, one for Sky and one for your television, you can usually set your Sky remote controller to operate the volume on most makes of television.  To do this, just follow the steps below:

Please note that if your television is made by Sony, then the volume control may already work.

1. Look up your TV's brand in the list below.
2. Turn on your television and Sky box and press the TV button on your Sky remote control.
3. Hold down SELECT and the RED keys together until the red light on your Sky remote control blinks twice (this is after about 2 seconds).
4. Press TV again.
5. Key in your television's brand code, the light on your Sky remote control blinks twice.
6. Press VOLUME+ on your Sky remote control. If your television volume increases, press SELECT. The light on your Sky remote control should blink twice.  If your television does nothing, repeat the sequence of pressing TV then VOLUME+ until the television volume works, then press SELECT.  If the light blinks 3 times, your remote control has checked all the possible settings for the code you used.  Check you have the right code and start again at step 1.
7. Press the SKY button to return to the TV channels
8. Check out the LATEST NEWS

• Prev
• Next